Korg Volca Kick EX-DEMO

The volca kick generates powerfully present kick sounds using a completely analog circuit. To create those sounds, it uses not a typical sine wave, but the sound of an oscillating filter from the original MS-20. The powerful Rev.1 filter of the MS-20 self-oscillates when resonance is increased to the maximum, and this is used to produce powerful kick sounds with complex overtones.

Simple and effective parameters are provided, allowing you to freely design a wide range of kick sounds to your taste. Start the sound design process by using MS-20 RESONATOR (PITCH/BEND/TIME) to control the sense of pitch that generates the "body resonance" of the kick sound. Then use PULSE COLOUR/LEVEL to adjust the clip components to control the sense of attack, and AMP ATTACK/DECAY to intuitively control the decay of the sound. The various kick-types allow you to create kick sounds that are appropriate for every type of dance music.

Features:

• Multi touch keyboard / Step key
• Analog synthesis Kick Generator
• 1 Voice Maximum Polyphony
• Structure
  • VCF (no input MS-20 Rev1 filter as resonator)
  • Pulse Generator
  • VCA
  • analogue DRIVE
  • analogue TONE
• MS-20 Resonator
  • Pitch/Octave
  • Bend
  • Time
• Pulse
  • Colour
  • Level
• Amp
  • Attack
  • Decay
• Low Pass Filter, 12 db/oct
• 1 part, 16 step sequencer
• Controls:
  • Pattern Chain
  • Motion Sequence
  • Touch FX
  • Active Step
  • Accent (On/Off, Depth)
  • Slide
  • Bend Reverse
  • Roll (1/4, 1/2, 1/1, 4/3, 2/1, 3/1)
  • Octave (1 Oct Up, 2 Oct Up)
  • Sustain
  • Swing
• Connects to headphones (3.5mm stereo mini jack)
• Sync In (3.5mm monaural mini jack, Maximum input level: 20V)Sync Out (3.5mm monaural mini jack, Output level: 5V)
• MIDI In
• Works on 6xAA alkaline batteries or AC 9V power supply. (Included)
• Approximately 10 hours of battery (using alkaline batteries)
• Dimensions (W x D x H): 193 x 115 x 46 mm / 7.60” x 4.53” x 1.81”
• Weight: 377 g / 13.29 oz. (Excluding batteries)